ANTIDUST ADHESIVE TAPE PACK

The Antidust adhesive tape pack is made up of 1 roll of perforated adhesive tape + 1 roll of blind tape.

Available in our store in various sizes.

Pack 1: Measurements of each roll: 6.5m x 38mm.
Pack 2: Measurements of each roll: 6.5m x 28mm.

PACK OF “Anti DUST” ADHESIVE TAPE FOR SEALING CELLULAR POLYCARBONATE

We must take into account something very important when using the ANTIDUST® anti-humidity and anti-dust tapes: This would be their correct placement method. We must stick the blind antidust tape G 3600 on the upper part and the breathable microperforated tape AD3400 on the lower part.

Summary

After cutting the polycarbonate piece to the size you need, it should be thoroughly cleaned of dust and chips
Clean any remaining dirt or grease with industrial cleaner Q60040 and if there is any remaining adhesive with adhesive cleaner Q60042.
Apply G3600 tape on the top and AD 3400 tape on the bottom
Place the protective side profiles
Seal the sides of the profiles where the water goes.